JackJaw 307 Stake Puller

JackJaw 307 Stake Puller for Small Diameter and Flush Stakes

JackJaw 307 Stake Puller is a professional stake extraction tool designed for fast, safe removal of smaller tent stakes, especially those driven flush with the ground or used with stake bars or stake plates. Like the JackJaw 302, it delivers a 16-to-1 mechanical advantage, allowing operators to generate high pulling force with controlled lever action while minimizing physical strain during teardown.

This model is typically used with a stake adapter such as AC0009 or AC0007 to enable efficient removal of flush-pounded stakes. The adjustable base provides added clearance and alignment, helping crews extract stakes cleanly without bending the stake or damaging surrounding surfaces.

Why the JackJaw 307 Matters

Smaller diameter stakes can be difficult to remove once driven flush, especially when installed in stake bars or plates. The JackJaw 307 is engineered to address this challenge by pulling stakes straight out of the surface. This aligned extraction helps protect reusable stakes, reduces surface damage to asphalt or hard ground, and supports safer, more efficient teardown workflows.

Key Features

• Provides a 16-to-1 mechanical advantage for controlled extraction
• Designed for small diameter tent stakes
• Adjustable base supports removal of flush-pounded stakes
• Commonly used with stake adapters AC0009 or AC0007
• Pulls stakes straight out to help prevent bending and surface damage

How the JackJaw 307 Is Used

Step 1: Select the Adapter

Choose the appropriate stake adapter, such as AC0009 or AC0007, based on the stake configuration and whether the stake is flush, in a bar, or in a plate.

Step 2: Position the Puller

Place the JackJaw 307 over the stake location. Use the adjustable base to create clearance when stakes are pounded flush with the ground.

Step 3: Engage and Align

Align the jaws and adapter with the stake so the pulling force stays in line with the stake shaft.

Step 4: Apply Lever Force

Apply downward pressure on the handle to activate the cam mechanism and extract the stake straight upward.

Performance and Protection

By maintaining alignment during extraction, the JackJaw 307 helps prevent stake deformation and reduces the risk of damaging asphalt or other hard surfaces. This makes it a reliable choice for professional crews working in varied installation environments.

Specifications

• Mechanical Advantage: 16 to 1
• Stake Diameter Range: 1/8 inch (3.18 mm) to 1 inch (5.4 mm)
• Base: Adjustable

Compatibility

• Designed for use with stake adapters AC0009 or AC0007
• Suitable for flush-pounded stakes, stake bars, and stake plates

Ideal For

• Professional tent rental companies
• Event install and teardown crews
• Removing small diameter or flush-installed tent stakes
• Jobs requiring surface protection and controlled extraction

Usage Notes

The JackJaw 307 Stake Puller is intended for professional tent installation and teardown operations involving smaller stakes. Always verify adapter compatibility before use and ensure proper alignment during extraction. Lever-based pulling helps reduce strain, preserve reusable stakes, and support safer, more efficient teardown across repeated installations.