null SVG Image

Cross Cable Tent Parts

  • Pinnacle Corner Fitting

    Pinnacle Corner Fitting

    The Pinnacle Corner Fitting connects frame legs with the perimeter tubing that forms the edges of the eaves. Hooks on the interior and exterior of the fitting are used for securing cross cables within the tent and for anchoring on the outside. Each...

    $43.11
    View Details
  • Pinnacle Tent Leg 8'

    Pinnacle Tent Leg 8'

    Replacement legs for Pinnacle Series High Peak Frame Tents all come in 8' lengths; all Pinnacles have the same eave height to allow enough clearance under the the valances. Aluminum legs can be purchased individually as replacements for existing...

    $56.66
    View Details
  • Spreader 10'x10', 20'x20'

    Spreader 10'x10', 20'x20'

    The 10’ x 10’ and 20’ x 20’ Pinnacle Spreader Bar is used to create the tent frame's perimeter on both 10' and 20' Pinnacle Series High Peak Frame Tents. Made from high-quality aluminum, each spreader is 9'3" (281.9 cm) long. When...

    $73.91
    View Details
  • Hardware components to assemble the rail curtain. Installed pinnacle rail curtain clamp to the pinnacle leg.

    Pinnacle Rail Curtain Clamp

    The Pinnacle Rail Curtain Clamp is used with the Pinnacle Rail Curtain Fitting to attach one end of a rail curtain pole to a leg on a Pinnacle Tent. The clamp wraps around the leg tubing on the tent, secured in place and also to the fitting by the bolt...

    $8.00
    View Details
  • Pin & Bail is used with the Pinnacle Series Cross Cable Frame Tent

    Pinnacle Pin & Bail

    This Pin & Bail is used with the Pinnacle Series Cross Cable Frame Tent, connected to the Center Mast with the Plastic Base that rests on the Cross Cables of a Pinnacle Series Frame Tent. A locking assembly  is created when the bail is...

    $2.77
    View Details
  • Pinnacle Base Plate

    Pinnacle Base Plate

    Base Plates for a Pinnacle Series Cross Cable Tent are cast aluminum plates to be placed at the bottom of each leg. The leg is inserted into the largest opening, with the hook facing toward the exterior of the tent. Ratchet straps are connected to the...

    $43.11
    View Details
  • 10' x 10' Pinnacle Cable 10' x 10' Pinnacle Cable

    10' x 10' Pinnacle Cable

    Cross Cables  are used to secure the Pinnacle Tent’s framework; the cables put tension on the fittings, keeping them and the tubing together and providing stability across the center of the tent. Cables are installed on the hooks located...

    $29.56
    View Details
  • 15' x 15' Pinnacle Cable 15' x 15' Pinnacle Cable

    15' x 15' Pinnacle Cable

    All fittings and tubing that create the perimeter of the tent frame are held together with the use of cross cables. The Cross Cables for 15' x 15' Pinnacle Series High Peak Frame Tents attach to hooks on the interiors of each corner fitting, creating...

    $39.41
    View Details
  • 20' x 20' Pinnacle Cable 20' x 20' Pinnacle Cable

    20' x 20' Pinnacle Cable

    These are sold per cable, NOT as a set.  Cross Cables are used in Pinnacle Series High Peak Frame Tents to keep the frame together. Each cable connects two corner fittings that are across from each other on the frame; the fittings have hooks on the...

    $45.57
    View Details
  • 15' x 15' Pinnacle Spreader

    15' x 15' Pinnacle Spreader

    The 15’ x 15’ Pinnacle Spreader bar is used only on 15' Pinnacle Series High Peak Frame Tents. Each spreader connects corner fittings to create the perimeter of the tent frame. Each spreader is 6'8" (2.03 m) long, and is made from...

    $61.59
    View Details
  • 20' x 30' Pinnacle Cables 20' x 30' Pinnacle Cables

    20' x 30' Pinnacle Cables

    These are sold per cable, NOT as a set.  Cross Cables  are used to secure the Pinnacle Tent’s framework; the cables put tension on the fittings, keeping them and the tubing together and providing stability across the center of the tent...

    $45.57
    View Details