18" x 3/4" Stake with Sidehook

18 Inch by 3/4 Inch Stake with Side Hook for Light Anchoring

18 Inch by 3/4 Inch Stake with Side Hook tent anchoring hardware is designed for smaller anchoring jobs where quick attachment and controlled tie-off are required. This stake is commonly used for securing tent sidewalls, ropes, and bounce house tie-downs, making it a practical option for event rental companies and install crews handling lightweight anchoring tasks during event setup and teardown.

Each stake features a welded side hook that creates a convenient attachment point for ropes, straps, or rings. Once installed, the attached line can be looped around the hook to help keep the tie-off secure and organized at ground level.

Why Side Hook Stakes Matter

Smaller anchoring points still play an important role in maintaining site organization and reducing movement of sidewalls or auxiliary structures. The side hook design simplifies attachment, helping crews work efficiently while maintaining consistent tension and control during event installations.

Key Features

• Designed for smaller anchoring jobs and lightweight applications
• Welded side hook provides a convenient tie-off point
• Supports securing sidewalls, ropes, and bounce house anchors
• Allows ropes, straps, or rings to loop easily around the hook
• Simple installation and removal during setup and teardown

How to Use the 18 Inch Stake with Side Hook

Step 1: Position the Stake

Place the stake at the desired anchoring location near the sidewall, rope, or inflatable tie-down point. Ensure the side hook is oriented for easy access once the stake is installed.

Step 2: Drive the Stake into the Ground

Drive the stake straight into the ground until it is firmly seated and stable. Proper depth helps achieve the intended holding strength for lighter anchoring tasks.

Step 3: Attach the Tie-Off

Loop the rope, strap, or ring around the welded side hook. Adjust tension as needed to secure the sidewall or structure without excessive strain.

Step 4: Inspect Before Use

Inspect the stake and attachment point to confirm stability before use. Periodically recheck anchoring during the event, especially if ground conditions or loads change.

Specifications

• Stake Length: 18 inches (45.7 cm)
• Stake Diameter: 3/4 inch (1.9 cm)
• Weight: 2.4 lbs (1.1 kg)

Ideal For

• Securing tent sidewalls
• Anchoring ropes for bounce houses
• Lightweight event setup applications
• Event rental companies and installation crews

Usage Notes

The 18 Inch by 3/4 Inch Stake with Side Hook is intended for smaller anchoring jobs and should not be used as a primary stake for larger tent installations. Always assess soil conditions, load requirements, and weather factors when selecting anchoring hardware. Proper installation and regular inspection help support safe setups, efficient teardown, and reliable performance across repeated event deployments.