2'' x 193'' Cam Buckle Assy

2'' x 193'' Cam Buckle Assembly for Tent Anchoring and Tensioning

The 2'' x 193'' Cam Buckle Assembly is a long-length tensioning strap designed for tent anchoring and general load control where fast adjustment and secure holding are required. Built with durable 2'' webbing and a 2'' cam buckle sewn to one end, this assembly allows installers to quickly set and release tension without the need for ratcheting mechanisms.

Commonly used in professional event and rental environments, cam buckle assemblies are well suited for applications that benefit from speed and simplicity during setup and teardown. The extended 193'' length provides added reach for larger footprints, wider setbacks, or sites with obstacles that require anchors to be positioned farther from the tent perimeter.

Why Choose a Cam Buckle Assembly

Cam buckles provide controlled tension through a spring-loaded locking mechanism that grips the webbing when load is applied. This makes them ideal for scenarios where frequent adjustments are needed or where installers prefer a quicker alternative to ratchets. The ability to fine-tune tension by hand helps streamline workflows while maintaining consistent hold.

The silver-finished hardware on this assembly is weather resistant, supporting repeated outdoor use in changing site conditions. With a plain end opposite the buckle, the strap can be routed through compatible hardware, stakes, or plates as required by the anchoring layout.

Key Features

• Durable 2'' webbing suitable for professional anchoring use
• Integrated 2'' cam buckle for fast, tool-free tensioning
• Extended length supports flexible anchoring layouts
• Weather-resistant silver-finish hardware
• Plain end allows custom routing through anchors or fittings
• Reusable solution for repeated event installations

Specifications

• Strap Width: 2'' (50.8 mm)
• Overall Length: 193'' (5.9 m)
• Buckle Type: 2'' cam buckle on one end
• Opposite End: Plain webbing
• Hardware Finish: Silver, weather resistant

How to Use the Cam Buckle Assembly

Step 1: Route the Plain End

Pass the plain end of the strap through the designated anchoring point, stake, plate, or compatible hardware according to the installation layout.

Step 2: Thread the Cam Buckle

Feed the plain end through the cam buckle, ensuring the webbing lies flat and is not twisted.

Step 3: Apply Tension

Pull the free end to tighten until the desired tension is achieved. The cam buckle will lock the webbing in place under load.

Step 4: Release After Use

To release tension during teardown, depress the cam lever and pull the webbing back through the buckle.

Ideal Applications

• Tent anchoring where fast adjustment is preferred
• Event rental and professional installations
• Temporary shelters and canopies
• Situations requiring frequent tension changes
• Installations with wide setbacks or obstructions

Compatibility Notes

• Designed for use with compatible anchoring hardware and fittings
• Plain end allows flexible routing based on site requirements
• Not a complete anchoring system on its own

What Is Included

• One 2'' x 193'' Cam Buckle Assembly

The 2'' x 193'' Cam Buckle Assembly delivers a practical balance of speed, flexibility, and durability for professional tent anchoring. Its long reach and easy-adjust cam buckle make it a reliable choice for event crews seeking efficient setup and teardown without sacrificing control.