2'' x 4' Gray Ratchet Strap with Ring

2 inch x 4 foot Gray Ratchet Strap with Ring for Master Series Frame Tents

2 inch x 4 foot Gray Ratchet Strap with Ring is a professional-grade anchoring component designed specifically for Master Series Frame Tents. This ratchet strap uses first run automotive quality seat belt webbing and features a commercial grade Double D-Ring sewn to one end, providing a secure and efficient connection point for tent anchoring hardware. The compact 4 foot length makes it ideal for controlled tensioning where shorter strap runs are required.

Commonly used by event rental companies and installation crews, this strap is the standard ratchet strap included with CELINA Master Series Frame Tent systems. It delivers consistent performance during tent installation, event setup, and teardown while maintaining durability for repeated use in demanding environments.

Why This Ratchet Strap Matters

Proper tent anchoring depends on reliable tension control and secure attachment points. This 2 inch ratchet strap with ring provides a stable and repeatable anchoring method for Master Series Frame Tents, helping crews maintain proper load distribution and minimize movement during wind or weather changes. The shorter length reduces excess webbing, improving site organization and reducing trip hazards around anchor points.

Key Features

• Manufactured from first run automotive quality seat belt webbing
• Commercial grade Double D-Ring sewn to one end
• Designed specifically for Master Series Frame Tent anchoring
• Compact length for controlled tensioning and clean installs
• Gray webbing for a neutral, professional appearance
• High strength construction for repeated event use

How to Use the 2 inch x 4 foot Ratchet Strap with Ring

Step 1: Position the Tent Frame

Assemble and position the Master Series Frame Tent according to the installation plan, ensuring anchor points are properly aligned.

Step 2: Attach the D-Ring

Connect the sewn Double D-Ring to the appropriate anchoring hardware, base plate, or frame attachment point specified for the Master Series system.

Step 3: Secure the Ratchet End

Feed the webbing into the ratchet mechanism and connect the ratchet to the designated stake, anchor, or ground attachment point.

Step 4: Apply Tension

Operate the ratchet to apply tension gradually until the tent frame is secure and properly aligned. Avoid over-tightening to prevent unnecessary stress on the frame or anchoring components.

Step 5: Inspect Before Event Use

Confirm that all straps are evenly tensioned and that the D-Ring and ratchet mechanisms are fully engaged before opening the tent to guests.

Specifications

• Width: 2 inch (50.8 mm)
• Overall Length: 4 foot (1.22 m), excluding the D-Ring
• Weight Rating: 4,000 lbs (1,914.37 kg)
• Webbing Material: Automotive quality seat belt webbing
• End Fitting: Sewn Double D-Ring

Compatibility

• Designed for use with CELINA Master Series Frame Tents
• Compatible with Master Series anchoring hardware and base systems
• Suitable for professional tent installation and rental operations

What Is Included and What Is Not

• Included: One 2 inch x 4 foot gray ratchet strap with sewn Double D-Ring
• Not Included: Tent stakes, base plates, anchors, or tent frame components

Ideal For

• Master Series Frame Tent installations
• Event rental companies and professional crews
• Applications requiring short, controlled strap lengths
• Temporary and semi-permanent event setups

Usage Notes

This ratchet strap is engineered for Master Series Frame Tent systems and is the standard strap supplied with those tents from CELINA. Always inspect webbing, stitching, and hardware before each use. Replace straps that show signs of fraying, cuts, or hardware damage to maintain safe anchoring conditions. Use only within rated load limits and follow recommended installation practices for optimal performance.