20' x 40' Classic Frame Aluminum Hybrid Tube 7' Pole and Fitting Kit

20 x 40 Classic Frame Aluminum ETS Tube 7 Foot Pole and Fitting Kit

20 x 40 Classic Frame Aluminum ETS Tube 7 Foot Pole and Fitting Kit is a professional frame structure kit engineered for Classic Frame tent installations that require strength, consistency, and efficient setup. Designed to support a 20 foot by 40 foot tent layout, this kit uses aluminum ETS tubing to create a freestanding frame with a clear interior and dependable performance for repeated event use.

This frame kit is commonly used by event rental companies, venues, and installation crews that need a reliable structural foundation for medium to large tent setups. The 7 foot leg height provides standard clearance for seating, catering, and general event layouts, while the Classic Frame design eliminates interior center poles for maximum usable space.

Why an ETS Tube Classic Frame Kit Matters

ETS tube aluminum frame systems are selected for their balance of strength and efficiency. The tube design supports consistent alignment across longer spans and helps crews achieve repeatable results during setup and teardown. Combined with the Classic Frame layout, this kit supports flexible event configurations without interior obstructions.

Key Features

• Designed for a 20 foot x 40 foot Classic Frame tent configuration
• Aluminum ETS tube construction for structural reliability
• Freestanding frame design with no interior center poles
• 7 foot leg pole height for standard event clearance
• Professional-grade poles and fittings for repeated use
• Built for efficient transport, setup, and teardown

How the 20 x 40 ETS Tube Frame Kit Is Used

Step 1: Lay Out Frame Components

Position all aluminum ETS tube poles and fittings according to the 20 x 40 footprint. Confirm the installation area is level and properly sized.

Step 2: Assemble the Roof Frame

Connect the roof frame sections using the included fittings. Assemble the roof structure on the ground to establish correct alignment.

Step 3: Install the 7 Foot Leg Poles

Attach the 7 foot leg poles to the roof frame. Once upright, the structure forms a freestanding perimeter with an open interior.

Step 4: Square and Level the Frame

Adjust the frame so all corners are square and the structure is level. Proper alignment supports safe anchoring and a clean final appearance.

Step 5: Complete Tent Installation

After the frame is stable, install the compatible tent top, sidewalls, and anchoring system required for the site and event conditions.

Specifications

• Tent Size Supported: 20 foot x 40 foot
• Frame Type: Classic Frame
• Construction: Aluminum ETS tube
• Pole Height: 7 foot
• Configuration: Pole and fitting kit
• Interior Support: No center poles

Compatibility

• Classic Frame tent tops designed for 20 x 40 layouts
• Standard frame tent anchoring systems
• Sidewalls and accessories sized for 20 x 40 Classic Frame tents

What Is Included and What Is Not

• Included: Aluminum ETS tube poles and fittings required to assemble a 20 x 40 Classic Frame structure
• Not Included: Tent top, sidewalls, ratchet straps, stakes, weights, or anchoring hardware

Ideal For

• Event rental company frame tent inventories
• Weddings, receptions, and private events
• Corporate gatherings and outdoor functions
• Venues hosting repeat medium to large installations
• Applications requiring consistent frame performance

Usage Notes

The 20 x 40 Classic Frame Aluminum ETS Tube 7 Foot Pole and Fitting Kit is intended for professional tent installations. Proper anchoring is required for safe operation, especially in variable weather conditions. Always verify site requirements and compatibility with your tent tops and accessories before installation. Routine inspection of frame components and fittings helps maintain long-term reliability and consistent performance across repeated event setups.