24" x 3/4" Stake with Sidehook

24 Inch by 3/4 Inch Stake with Side Hook for Versatile Anchoring

24 Inch by 3/4 Inch Stake with Side Hook tent anchoring hardware is designed to provide dependable ground anchoring with a convenient built-in tie-off point. Manufactured from high carbon steel for enhanced durability, this single head anchoring pin supports a range of light to moderate anchoring tasks commonly encountered during event setup and teardown. It is frequently used by event rental companies and install crews for securing small canopies, sidewalls, and inflatable bounce houses.

The welded side hook adds flexibility in the field by allowing webbing, rope, or string to be looped directly at the stake. It can also be used to attach hardware such as O-Rings or D-Rings, creating a controlled and organized anchoring point without additional components.

Why Side Hook Stakes Matter

Efficient anchoring is not only about holding strength but also about ease of attachment and workflow speed. The side hook design simplifies tie-offs at ground level, helping crews reduce setup time while maintaining consistent tension. For auxiliary anchoring applications, this stake offers a practical balance of durability, reach, and usability.

Key Features

• Manufactured from high carbon steel for long-term durability
• Single head anchoring pin with welded side hook
• Side hook provides a convenient tie-off point for webbing, rope, or string
• Compatible with hardware such as O-Rings or D-Rings
• Designed for anchoring small canopies, sidewalls, and inflatables

How to Use the 24 Inch Stake with Side Hook

Step 1: Position the Stake

Select the anchoring location based on the structure or accessory being secured. Position the stake so the side hook faces the direction of the tie-off for easy access after installation.

Step 2: Drive the Stake into the Ground

Drive the stake straight into the ground until it is firmly seated and stable. Proper depth helps ensure consistent holding strength and reduces the chance of movement during use.

Step 3: Attach the Tie-Off

Loop webbing, rope, or string around the welded side hook, or attach hardware such as an O-Ring or D-Ring. Apply appropriate tension based on the application and load.

Step 4: Inspect and Monitor

Inspect the stake and attachment point before use. Periodically check anchoring throughout the event, especially if soil conditions or weather change.

Specifications

• Size: 24 inches by 3/4 inch (0.61 m x 19.05 mm)
• Weight: 4 lbs (1.81 kg)
• Material: High carbon steel
• Configuration: Single head anchoring pin with side hook
• NSN: 5315-01-645-0437

Ideal For

• Anchoring small canopies
• Securing tent sidewalls
• Tethering inflatable bounce houses
• Event rental companies and installation crews

Usage Notes

The 24 Inch by 3/4 Inch Stake with Side Hook is intended for light to moderate anchoring applications and should be selected based on load requirements, soil conditions, and weather considerations. It is not a replacement for primary tent stakes used in larger tent installations. Proper installation, regular inspection, and correct anchor selection help support safe setups, efficient teardown, and reliable performance across repeated event deployments.