MID SECTION 20' x 10' Classic Frame Aluminum Single Tube 7' Pole and Fitting Kit

Mid-Section: 20' x 10' Classic Frame Aluminum Single Tube 7' Pole and Fitting Kit

The Mid-Section: 20' x 10' Classic Frame Aluminum Single Tube 7' Pole and Fitting Kit is a specialized structural expansion component designed for professional rental companies and event planners looking to extend the length of an existing 20-foot wide West Coast Style frame tent. This kit provides the necessary hardware to add a 10-foot "bay" or section to a compatible modular system, effectively increasing the total covered area by 200 square feet. By utilizing high-strength single-tube aluminum construction, the frame components remain lightweight for easy transport and handling while maintaining the structural rigidity required for commercial-grade event setup.

This mid-section kit is engineered to integrate seamlessly into a standard West Coast Style system. Because it utilizes industry-standard 2-inch diameter tubing and zinc-plated steel fittings, it allows for maximum modular flexibility and simplified maintenance across a professional fleet. This specific kit is intended for 7-foot eave heights, providing a consistent profile when expanding your existing 7-foot leg inventory. Whether you are extending a 20x20 into a 20x30 or creating a massive custom-length corridor, this kit provides the essential "bridge" hardware for a professional tent installation.

The Advantage of Modular Expansion

In the event industry, the ability to adapt to varying site requirements and guest counts is vital. The Mid-Section: 20' x 10' Classic Frame Aluminum Single Tube 7' Pole and Fitting Kit allows you to scale your inventory without the need to purchase entirely new standalone frames. By inserting this 10-foot mid-section between two existing 20-foot wide end-units, you can create elongated structures ideal for long-format catering rows, wedding banquet extensions, or protected pedestrian walkways. This modularity ensures that your tent installation can be tailored precisely to the footprint of the event space.

Key Features

• Modular Expansion Design: Specifically engineered to add a 10-foot section to any 20-foot wide West Coast Style frame.
• High-Strength Single Tube Aluminum: 2-inch diameter anodized aluminum tubing provides a professional-grade strength-to-weight ratio.
• 7-Foot Eave Height Compatibility: Designed for use with standard 7-foot legs to maintain a uniform roofline across the structure.
• Heavy-Duty Zinc-Plated Fittings: Includes specialized "Side Tee" and "Rafter Bracket" fittings required for mid-section junctions.
• West Coast Style Compatibility: Fully interchangeable with industry-standard poles and fittings from most major manufacturers.
• Corrosion-Resistant Finish: Anodized aluminum and plated steel components are built to withstand repeated outdoor use and exposure.

How to Use / Installation Best Practices

Integrating a mid-section into a larger frame requires a coordinated crew and a clear understanding of modular tent installation.

Step 1: Layout and Planning Lay out your 20-foot wide end units and place the 10-foot mid-section components (spreaders and mid-rafters) in the center. Ensure you have the required 7-foot legs for the additional mid-section junctions.

Step 2: Roof Frame Integration Assemble the roof framework at ground level. Connect the mid-section spreaders to the side tees of the end units. Insert the mid-rafters into the crown/side tee assembly to form the additional 10-foot peak section. Secure all joints with R-pins or pin-and-bail fasteners.

Step 3: Fabric Management If you are using a modular "lace-together" vinyl top, lace the mid-section fabric to the end-unit sections while the frame is at ground level. Ensure the lace line is properly aligned with the mid-section rafters and spreaders for a taut finish.

Step 4: The Lift With a coordinated crew distributed at the junctions, lift the frame and insert the 7-foot legs. It is critical to lift evenly across the entire length to prevent the aluminum tubing from bowing at the connection points.

Step 5: Anchoring and Tensioning Once the structure is raised, perform immediate stake driving at the new mid-section leg locations. Secure every leg with heavy-duty ratchet straps to ensure lateral stability and a professional, square appearance.

Specifications

Compatibility and Inclusions

Note: This is a Mid-Section Kit ONLY. It is designed to expand an existing frame and is not a standalone tent structure.

• Included: Aluminum rafters and spreaders for one 10-foot bay, two 7-foot aluminum legs, and the necessary steel mid-section fittings.
• NOT Included: End-unit frame components, vinyl tent top, anchoring stakes, or ratchet straps.
• System Requirement: Must be used with a 20-foot wide West Coast Style frame system.

Ideal for / Best Uses

• Fleet Expansion: Allows rental companies to offer 20x30, 20x40, or 20x50 configurations using existing 20x20 end-units.
• Long Catering Tunnels: Ideal for creating protected, elongated service areas for large-scale outdoor banquets.
• Festival Walkways: Provides a modular solution for creating weather-protected paths of any length.
• Industrial Coverage: Perfect for extending protected workspace or storage over long rows of equipment during maintenance projects.