Tear-Aid Patch Kit Type B

Tear-Aid Patch Kit Type B for Vinyl Coated Material Repairs

Tear-Aid Patch Kit Type B repair kit is designed exclusively for repairing vinyl coated materials. This kit provides a reliable, field-ready solution for addressing holes and tears without sewing, heat, or specialized tools. It is commonly used by event rental companies and maintenance crews to perform fast repairs that support continued use of vinyl coated tent components and related equipment.

Application is quick and straightforward, making this kit well suited for on-site repairs during event setup, teardown, or routine maintenance. When applied correctly, the patch forms a water-resistant, long lasting bond that helps prevent damage from spreading and reduces downtime between events.

Why This Repair Kit Matters

Vinyl coated materials require repair solutions specifically designed for their surface properties. Tear-Aid Patch Kit Type B is formulated for this purpose, allowing crews to address minor damage promptly and maintain the performance and appearance of vinyl coated fabrics. Immediate repairs help minimize the risk of larger tears, moisture intrusion, and unnecessary replacement costs.

Key Features

• Exclusively designed for vinyl coated materials
• Creates a water-resistant, long lasting repair when properly applied
• No sewing, heat, or special tools required
• Patches can be cut to custom sizes and shapes
• Suitable for field repairs during setup, teardown, or maintenance

How to Use Tear-Aid Patch Kit Type B

Step 1: Prepare the Surface

Clean the damaged area thoroughly using the included alcohol prep pads. Proper surface preparation removes oils, dirt, and residue, helping ensure strong adhesion to the vinyl coated material.

Step 2: Cut the Patch

Cut the patch to the appropriate size and shape so it fully covers the tear or hole. Allow enough overlap around the damaged area to support a secure repair.

Step 3: Apply the Patch

Remove the paper backing from the patch and carefully place it over the damaged area. Once positioned, press the patch firmly onto the surface.

Step 4: Press and Rub to Adhere

Press and rub the patch thoroughly to activate the adhesive and ensure full contact with the vinyl coated surface. Proper pressure helps create a strong, water-resistant seal.

Step 5: Reinforce if Needed

For repairs in higher-stress areas, use the included reinforcement filament as directed to help strengthen the patch and reduce the likelihood of future tearing.

Specifications

• Material Compatibility: Vinyl coated materials only
• Primary Patch Size: 3 inches x 12 inches (76.2 mm x 304.8 mm)
• Secondary Patch Size: 7/8 inch x 7/8 inch (22.23 mm x 22.23 mm)

Kit Contents

• One 3 inch x 12 inch patch
• One 7/8 inch x 7/8 inch patch
• One 12 inch reinforcement filament
• Two alcohol prep pads

Ideal For

• Event rental companies maintaining vinyl coated tent components
• Install and teardown crews performing on-site repairs
• Repairing small holes or tears before they expand
• Routine maintenance of vinyl coated event equipment

Usage Notes

Tear-Aid Patch Kit Type B is intended only for vinyl coated materials and should not be used on other fabric types. For best results, apply patches to clean, dry surfaces and inspect repaired areas during future installations. Keeping a dedicated vinyl repair kit on hand allows crews to respond quickly to minor damage and helps extend the service life of vinyl coated equipment across repeated events.