null SVG Image

West Coast Style Frame Tent Fittings

  • Base Plate (Standard)

    Base Plate (Standard)

    A Base Plate fitting is used in all standard frame tent systems (with the exception of the Master Series Frame Tent) to prevent the legs or uprights tubing from sinking. The plate has a protrusion that the leg slides onto and is secured in place with a...

    $9.85
    View Details
  • Corner Fitting

    Corner Fitting

    A Corner Fitting is used in West Coast Style Frame Tents, connecting to leg tubing, perimeter spreaders, and hip rafters. Four corner fittings are required per tent. Each West Coast style frame tent fitting is manufactured from 1.25" schedule 40...

    $19.70
    View Details
  • Side Tee with Ring

    Side Tee with Ring

    Every Side Tee Fitting with Ring, like all West Coast Style Frame Tent Fittings, is manufactured from 1.25" schedule 40 steel pipe and finished with zinc plating. A Side Tee fitting is used in West Coast Style Frame Tent Systems to increase the...

    $18.47
    View Details
  • 2' Adjustable Base Plate

    2' Adjustable Base Plate

    A 2' / 24" Adjustable Base Plate fitting is an optional item used in frame tent systems to increase the eave height or to adjust a leg height for installations on uneven surfaces. The base plate protrusion slides inside a standard 2" OD x 1.25" wall...

    $27.09
    View Details
  • 3' Adjustable Base Plate

    3' Adjustable Base Plate

    A 3' / 36" Adjustable Base Plate fitting is an optional item used in frame tent systems to increase the eave height or to adjust a leg height for installations on uneven surfaces. The base plate protrusion slides inside a standard 2" OD x 1.25" wall...

    $30.79
    View Details
  • 4' Adjustable Base Plate

    4' Adjustable Base Plate

    A 4' / 48" Adjustable Base Plate fitting is an optional item used in frame tent systems to increase the eave height or to adjust a leg height for installations on uneven surfaces. The base plate protrusion slides inside a standard 2" OD x 1.25" wall...

    $33.25
    View Details
  • 4 Way Crown

    4 Way Crown

    A 4 Way Crown fitting is used on smaller, square-shaped West Coast Style Frame Tents such as an 8' x 8', 10' x 10', or 15' x 15' frame tent. The protrusions on the 4 Way Crown extend toward each of the corner fittings on the tent frame. West Coast...

    $24.63
    View Details
  • 8 Way Crown

    8 Way Crown

    The crown fitting on square tents that measure 20' by 20', 30' by 30', and 40' by 40', 8 Way Crowns have four protrusions that connect to corner fittings and four protrusions that extend toward the side tee fittings at the mid points on the...

    $33.87
    View Details
  • 6 Way Hip Joint

    6 Way Hip Joint

    Used in 40' wide West Coast Style Frame Tents, a 6 Way Hip Joint Fitting connects the tubing that leads from the crown fittings to the tubing that extends from the corner and side tee fittings at the tent frame perimeter. Located at the mid point along...

    $30.79
    View Details
  • 6 Way Crown

    6 Way Crown

    6 Way Crown fittings are used in 20', 30', and 40' wide rectangle-shaped West Coast Style Frame Tents. Used in pairs, the 6 Way Crown has protrusions that extend toward the corners and side tees directly in line with the crown. The last protrusion...

    $24.63
    View Details
  • 3 Way Crown

    3 Way Crown

    A 3 Way Crown fitting is used in pairs on smaller, rectangle-shaped West Coast Style Frame Tents, including 8', 10', 12', and 15' wide tents. The crown has two protrusions that point toward the corners on that end, with a single horizontal...

    $20.93
    View Details

West Coast Style Frame Systems utilize common size tube lengths, standard fittings, and pin fasteners to create hundreds of use-friendly frame tents in a variety of sizes and configurations. This system is used across the tent industry and is interchangeable with other manufacturers' products that use a West Coast Style Frame System. CELINA's West Coast Style Frame Tent Fittings are manufactured from 1.25" schedule 40 steel pipe and finished with zinc plating.