Presto/Pinnacle 24" Anchor Pin

18" x 1/2" Anchoring Hook

The simple 18” Anchoring Hook is the perfect solution for minimal anchoring. The loop at the top can attach to any rope, wire, or strap connected to your item, and is then hammered into the ground to provide stability. Anchoring Hooks should not be...

18" X 3/4" Stake with sidehook

Used for smaller anchoring jobs, 18” Stakes with Side Hooks are great for securing sidewalls or ropes for bounce houses. Each stake has a welded hook for easy attachment. When installed, the rope, strap, or rings attached to the stake can be looped...

18" x 5/8" Red Tent Pin

Each 18" Tent Pin is made from painted steel for durability. Pins match all specifications for military use.18" (457.2 mm) long5/8" (15.88 mm) diameter1.67 lbs (0.76 kg)MIL-P-501, Type IIINSN: 8340-01-985-7461

18" x 5/8" Anchoring Hook

Whether you're securing tent sidewalls ropes or keeping balloons and bounce houses tethered, the 18" by 5/8" Anchoring Hook is easy to install and use.Hook Length: 18" (45.7 cm)Weight: 3 lbs (1.4 kg)

22" Anchoring Pin

Anchoring Pins are used on Pinnacle Series Frame Tents to secure the Pinnacle Base Plates to the ground. One pin is required for every base plate in use; Celina does not recommend using anchoring pins in place of any other staking procedures. Each pin...

24" x 3/4" Stake with Sidehook

Single head anchoring pins  are manufactured from high carbon steel for enhanced durability. The side hook attached to the stake offers a convenient tie-off point for webbing, rope, or string, and can be used to attach hardware such as O-Rings or...

24" x 5/8" Anchoring Hook

Anchoring Hooks measure 24" (0.61 m) by 5/8" (15.88 mm) and are manufactured from high carbon steel. The angled hook at the top offers a convenient method to tie off webbing, rope, or string, or to attach hardware such as O-Rings or D-Rings...