Layout Handbook

Celina's Layout Handbook is an indispensable resource for tent installing. Within its pages lies the hardware orientation, required pieces, and measurements specific to every size and brand of tent we offer. Additional Informative Guides: ...

Tent Squaring Kit

7" Raize It! Plate

The 7” (177.8 mm) Raize It! can, with the assistance of a winch (not included), aid in lifting poles 4" (101.6 mm) to 7.5” (190.5 mm) in diameter. The Raize it! system can lift up to 1000 lbs (453.6 kg), with only one person needed to raise a...

4" Raize It! Plate

The 4" (101.6 mm) Raize It! Plate is a small, compact sled to aid in raising pole tent center and quarter poles. Set up in a few minutes in conjunction with a winch system (not included), it can reduce the installation of a single pole to as little...

JackJaw Link Arm Kit

The Link Arm Kit is compatible with the original JackJaw 301 and 302. These arms can be used as replacement parts in the event that the originals become damaged. Each kit contains two upgraded link arms and the bolts to attach them to the handle portion...

JackJaw 502 Stake Puller

The JackJaw®502 is the fast, easy and safe way to extract ¾” (19.05 mm) to 1 ¼” (31.75 mm).tent stakes or rebar from hard ground conditions or stakes longer than 42” (1,066.8 mm).  These conditions generally...

JackJaw 501 Stake Puller

The JackJaw® 501 is the fast, easy and safe way to pull ¾” (19.05 mm)  to 1 ¼” (31.75 mm) tent stakes or rebar from hard ground conditions or stakes longer than 42” (1,066.8 mm).  These conditions generally...

JackJaw 402 Stake Puller

The JackJaw® 402 is the fast, easy and safe way to extract ¾” (19.05 mm) to 1 ¼” (31.75 mm) tent stakes or rebar.  This large tent stake puller prevents bending the stakes and damage to asphalt by pulling stakes...

JackJaw 401 Stake Puller

The JackJaw 401 Tent Stake Extractor removes 3/4" (19.05 mm) to 1 1/4" (31.75 mm) diameter tent stakes and rebar that are commonly used by tent rental professionals. The unique feature of the JackJaw 401 is that it has a folding handle with an extension...

JackJaw 308 Stake Puller

The JackJaw 308 is similar to the 301, but for smaller tent stakes and ground rods and T-posts.  The JJ0308 was developed specifically to make easy work of removing 3/16” (4.76 mm) to 1" (25.4 mm) diameter tent stakes and rebar that are...

JackJaw 307 Stake Puller

Like the JJ0302, the JackJaw®307 has a 16-to-1 mechanical advantage.  It is usually used with a stake adapter AC0009 or AC0007 to enable the operator to pull flush pounded stakes from the ground or stake bars or stake plates.The JackJaw®307...

JackJaw 302 Stake Puller

The JackJaw® 302 is the fast, easy and safe way to pull tent stakes or rebar with a diameter of ¾” (19.05 mm) to 1 ¼” (31.75 mm). Lightweight at only 26 lbs (11.79 kg), the sturdy lever arm gives you a 16-to-1...