2 Way Flat Tee
Used in creating corners on frame assemblies, the 2 Way Flat Tee is made from the same 1.25" schedule 40 steel pipe as all West Coast Style Frame Fittings, with zinc plating in order to stave off corrosion and wear. Most 2 Way Flat Tees are used to create the top corners of banner frames; the fitting has two protrusions extending out at 90 degrees from one another. Each protrusions fits within West Coast Style Frame Tubing, with a pair of holes for pin fasteners.
|Outside Diameter||1.656"||4.206 cm|
|Inside Diameter||1.38"||3.505 cm|
|Wall Thickness||0.14"||3.56 mm|
|Weight||3.0 lbs.||1.36 kg|
|Strength||45,000 PSI||3,163.81 kgf/cm2|