18" x 5/8" Double Head Stake

Created using high-carbon steel, Celina's 18" Double Head Stakes are the smallest double-head stakes that we offer. The double head allows for easy gripping when it comes time to remove the stakes at the end of an installation. Steel tent stakes are...

18" x 1/2" Anchoring Hook

The simple 18” Anchoring Hook is the perfect solution for minimal anchoring. The loop at the top can attach to any rope, wire, or strap connected to your item, and is then hammered into the ground to provide stability. Anchoring Hooks should not be...

18" X 3/4" Stake with sidehook

Used for smaller anchoring jobs, 18” Stakes with Side Hooks are great for securing sidewalls or ropes for bounce houses. Each stake has a welded hook for easy attachment. When installed, the rope, strap, or rings attached to the stake can be looped...

18" x 5/8" Red Tent Pin

Each 18" Tent Pin is made from painted steel for durability. Pins match all specifications for military use.18" (457.2 mm) long5/8" (15.88 mm) diameter1.67 lbs (0.76 kg)MIL-P-501, Type IIINSN: 8340-01-985-7461

18" x 5/8" Anchoring Hook

Whether you're securing tent sidewalls ropes or keeping balloons and bounce houses tethered, the 18" by 5/8" Anchoring Hook is easy to install and use.Hook Length: 18" (45.7 cm)Weight: 3 lbs (1.4 kg)

3 Way Flat Tee

The 3 Way Flat Tee is a specialty fitting used to add additional supports to a frame and offset leg tube locations. This is essential is larger Classic Series Gable Frame Tents, and becomes useful when creating a banner stand for tents and...

2'' x 125'' Strap Top

This strap assembly is a plain strap at one end with a 2" snap hook on the other. Manufactured using first-run automotive quality seat belt webbing, it provides a safe, easy, and secure method for anchoring tents. Width: 2'' (50.8...

7/8'' Asphalt Plug

Asphalt Plugs are used once a tent has been removed from a paved area to reduce wear by providing displacement for any water that may collect in stake holes. Plugs can be used in asphalt, black top, or pavement. The 7/8" (2.22 cm) plug should be used on...

White 20 Gal Pull Over Cover

2" Square Pin & Bail

The 2" (50.8 mm) Pin & Bail fastener is an economical and efficient fastener used to secure the fittings to the main tubing on frame tents. Primarily used on Adjustable Double Tube Braces, the Pin & Bail creates a locking assembly when the...

4 1/2" Bolt & Wing Nut

The 4 5/8" (114.3 mm) Bolt and Wing Nut Assembly is a safe and secure way to fasten Celina Tent's Double Tubing to West Coast Style Frame Tent fittings. While normal R Pins are normally sufficient to assemble a frame under most conditions, areas with...

4 Way Flat Tee

Used in larger Classic Series Gable Frame Tents and for independent projects, the 4 Way Flat Tee is made from zinc plated, 1.25" schedule 40 steel pipe for strength and corrosion resistance. For use with displays and hangers, the 4 Way Flat Tee connects...