2 Way Corner Rail Fitting

Used in conjunction with rail skirts and spreader bars, the 2 Way Corner Rail Fitting slides over leg tubing to allow the connection of a single rail skirt, or two rail skirts extending from the leg at 90 degrees from one another. The two protrusions,...

48" Stake Bar

Maximum tent anchoring can be achieved through the use of Celina’s 48” Stake Bar. Each bar allows for the installation of 5 stakes at a single anchoring point along a tent. Each bar has 5 holes, which can be used with three stakes (one at...

2 Way Straight Rail Fitting

The 2 Way Straight Rail Fitting is specially fitted for use on frame tents to connect two rail skirt tubes to a single leg location. With two protrusions at 180 degrees from one another, this fitting allows you to create a continuous rail skirt border...

6'' x 6'' Anti-Sink Pole Plate

The 6" x 6" (152.4 mm x 152.4 mm) treated-wood Anti-Sink Pole Plate has two main uses:Plates keep a pole tent secure by minimizing sliding that may occur when poles are installed on asphalt or concrete, and preventing sinking that may...

3 Way Corner Rail Fitting

The 3 Way Corner Rail Fitting is used to support and install rail curtains and banners. When installed on a leg tube, it can be used to create dividers within a tent or walkway railings leading in. Each of the protrusions has the standard alignment...

Corner Brace

CELINA's Corner Brace can be used with the Classic Series Frame Tent equipped with a standard 2" Aluminum Single Tube frame system. Corner Braces add support to the frame and help stabilize the tent during high winds. Once attached to the corner...

White 30 Gal Pull Over Cover

7' Galvanized Pole Bottom

The 7' Medium Duty Bottom Pole is used at the base of the center pole. This Medium Duty Pole is compatible with Celina Tent's 2 3/8" O.D. Center Pole inserts and top poles. The swaged sectional poles fit conveniently into another eliminating the hassles...

Side Brace

CELINA's Side Brace can be used with the Classic Series Frame Tent equipped with a standard 2" Aluminum Single Tube frame system. Side Braces add support to the frame and help stabilize the tent during high winds. Once attached to a...

2 Way Flat Tee

Used in creating corners on frame assemblies, the 2 Way Flat Tee is made from the same 1.25" schedule 40 steel pipe as all West Coast Style Frame Fittings, with zinc plating in order to stave off corrosion and wear. Most 2 Way Flat Tees are used to...

Square Corner Fitting

The use of Square Corner Fittings can be used to create unique frame configurations, adding a shade overhang or increasing the stability of a banner frame. Each is compatible with West Coast Style Frame Fittings and Tubing, with a pair of drilled...

Adjustable Double Tube Brace

Adjustable Double Tube Braces are used on Aluminum Double Tube (ADT) or Hybrid Style Frame Systems. Due to their use of heavier double tubes with standard sized angled fittings, it's necessary to increase the strength of each joint. Each brace can...