Presto/Pinnacle 24" Anchor Pin

15" x 1/2" Auger Stake

For extra holding power, Celina offers the Single-Helix 15” Auger Stake. Easy to install, this stake is pressed into the ground, turning to allow the helix to spiral into the earth for increased hold. Auger stakes are perfect for areas with sand,...

30" x 5/8" Auger Stake

For soft or wet soil conditions, Auger Stakes can be used to enhance the hold of your tent anchoring. Each stake has two coils, which when installed keep the stake from being pulled directly out of the ground in addition to the angled pull from the...

48" x 3/4" Auger Stake

Celina's Auger Stakes are for applications requiring extra hold, commonly used in installations on sand & loose soil conditions. To install, the bottom of the stake is pushed into the ground up to the metal coils, at which point the stake is rotated...

1 1/8'' Asphalt Plug

Used to repair stake holes in asphalt, pavement, and black top, Asphalt Plugs reduce erosion by providing displacement for any water that may collect in stake holes. The 1 1/8" (2.86 cm) diameter plug is the larger of the two asphalt plugs we offer...

18" x 5/8" Double Head Stake

Created using high-carbon steel, Celina's 18" Double Head Stakes are the smallest double-head stakes that we offer. The double head allows for easy gripping when it comes time to remove the stakes at the end of an installation. Steel tent stakes are...

18" x 1/2" Anchoring Hook

The simple 18” Anchoring Hook is the perfect solution for minimal anchoring. The loop at the top can attach to any rope, wire, or strap connected to your item, and is then hammered into the ground to provide stability. Anchoring Hooks should not be...

18" X 3/4" Stake with sidehook

Used for smaller anchoring jobs, 18” Stakes with Side Hooks are great for securing sidewalls or ropes for bounce houses. Each stake has a welded hook for easy attachment. When installed, the rope, strap, or rings attached to the stake can be looped...

18" x 5/8" Red Tent Pin

Each 18" Tent Pin is made from painted steel for durability. Pins match all specifications for military use.18" (457.2 mm) long5/8" (15.88 mm) diameter1.67 lbs (0.76 kg)MIL-P-501, Type IIINSN: 8340-01-985-7461

18" x 5/8" Anchoring Hook

Whether you're securing tent sidewalls ropes or keeping balloons and bounce houses tethered, the 18" by 5/8" Anchoring Hook is easy to install and use.Hook Length: 18" (45.7 cm)Weight: 3 lbs (1.4 kg)

7/8'' Asphalt Plug

Asphalt Plugs are used once a tent has been removed from a paved area to reduce wear by providing displacement for any water that may collect in stake holes. Plugs can be used in asphalt, black top, or pavement. The 7/8" (2.22 cm) plug should be used on...

14'' x 31'' Stake Bag

The Slide-In Tent Stake Bag allows for easy stake storage and transportation. The bag is reinforced for many years of use.Specifications include:Measures 14" x 31" (355.6 mm x 787.4 mm)Canvas construction with nylon bindingGenuine-leather reinforced...